User talk:Aboutd

Helical Geared Motor

Features Helical Gear Units are designed for continuous duty under difficult operating conditions. Gears are carburized to a hardness of 58 - 62 HRC for durability. Gearcase and flanges of high strength gray cast iron. Foot mounted, flange mounted

Technical Data Input power: 0.18KW-10 KW Transmission ratio: 4-279 Mounting structure: Foot-Mounted, Flange-Mounted Model: R 07 Series to R 87 Series

Shaft Mounted Speed Reducer Shaft Mounted Speed Reducer is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW. Features Model in six sizes from B to G with nominal ratios of 5:1, 13:1 and 20:1 Extended 2 year warranty. Mounts direct onto the driven shaft:

  No alignment problems.
  No shaft couplings.
  Flexible motor mounted in a convenient position. 

No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a

  torque arm which can be simply shortened or extended to swing the SMSR about its output hub to tension the
  'V' -Belts. 

Quick and easy speed changing via belt drive. Final output speed can be very accurately obtained by adjusting the 'V' -Belt' drive ratio. High efficiency by using helical gears

        Single - 98% efficiency.
        Double - 96% efficiency. 

Anti-run back device can easily be fitted on site. Most SMSR use "6000" series I. S. O. plan deep groove ball bearings, stock around the world. Double lip type oil seals used throughout. Shaft Mounted Speed Reducers can be mounted in any position. Proven history of success in all industrial applications; particularly, conveyors & elevators in the construction

   industry. 

Long established and proven drive system. Wide range of variation available:

  Shaft mount, face mount, foot mount, motor mount, hydraulic input, screw conveyor adaptor. 

Ultra compact when compared to other designs. AGNEE offers a full comprehensive repair facility including spares availability.

Helical Gear Box

The Helical Gear Reducer Housing is usually made of Close Grain Cast Iron or Structural Steel. They are rugged, corrosion resistant and absorb shock and vibration. The Reducer Gearing is Helical type made from high quality alloy steel, hobbed , gas carburized , tempered and surface finish to class 10 AGMA quality. That leads to a very good efficiency and a quiet working condition. The shafts are from alloy steel forging or bars heat treated. Low speed shafts can be solid or hollow type. Bearings are fitted on a ground journal and are spherical roller or/ and taper roller type. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. They are available in: Center Distances from 175 mm to 750 mm Single Stage or Multiple Stage Reduction Ratio from 2:1 to 625:1 Tailor-made as per Specification, Drawings or Sample  For Automobile and Industrial uses Outer Diameter From 25mm/3” to 2000mm / 78”

       Teeth Size from 1 module 

Worm Gear Box The Worm Speed Reducers have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened, tempered and ground. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is affected by means of standard polypropylene or metal fans. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. They are available in:

Vast range of Models suit every individual's requirement Some Models like C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-stock or

  on short notice          

Center Distances from 40 mm to 400 mm In Single or Double Stage Reductions Ratios from 5:1 to 4900:1 Also made as per customer's specifications, Drawing, requirements

        Overhauling of Old Gear Boxes also undertaken, Early delivery schedules

Rack and Pinion Specifications of Rack and Pinion gears 1.0 Module/ 25 D.P. to 12 Module/2.1 D.P.

Face Widths up to 250 mm/9"

In Mild Steel, Alloy Steel, Hardened and Tempered Steels , Case carburised, Case Hardened Steels, Cast Iron, or as specified

Custom made as per Specifications, Drawing or Sample

Automotive and Industrial use   Required information for quotation : (a) Material of Construction – eg. Steel. (b) Teeth Specifications – Module, pitch. (c) Dimensions: Face Width, Length. (d) Hardening and tempering required etc. (e) Holding holes if any, Quantity, Any other requirement